[TUTORIAL] CUSTOM RECOVERY FOR INNJOO FIRE PLUS 3G

 

Download and flash the ported Philz recovery for the Innjoo_Fire_Plus_3G.. You can flash with your phone via mobile uncle tools (or similar software) or via SP FLASH TOOLS.
Follow details below:

Via Mobile Uncle Tools, Root Required
> Download from play store or from here
> Copy to the root of SD card
> Run Mobile Uncle Tools and select the Update Recovery
> Navigate to the recovery and select it
> Confirm your selection and press "ok"
> Boot straight into recovery to confirm you are ON. GOOD LUCK!

Via SP FLASH TOOLS, Root Not Required
Use only if you are conversant with flashing with the tool and have necessary drivers installed.
> Unzip the downloaded file into a fresh folder
> Run SP Flash Tools and select scatter_loading
> Navigate to the folder and select the MT6592 Scatter File
> Click the download button, remove your battery and plug phone to USB
> Wait until finished, then reboot into recovery to confirm
 
Booting Into Recovery Mode
> The usual 2-key combo (power + volume up keys) might not work for the InnJoo Fire Plus 3G.
> Use any root app such as TitaniumBackup, Link2SD, Moblie Uncle, Advanced Rebooter, etc

OR

> Plug the device into any power source then try the combo keys. It would work.

To Flash ROMs
> Boot into Recovery
> Select wipe and install
> Select Wipe to install a new rom
> Confirm and Wait until finished
> Proceed to install Zip
> Enjoy.

Mobile Uncle Tools
Recovery img via SP FLASH TOOLS
Philz recovery img


NOTE: TO FLASH FOR OTHER DEVICES, PLEASE CREATE/DOWNLOAD THE CUSTOM RECOVERY FOR THE DEVICE FIRST, THEN FOLLOW SAME PROCEDURES.